Caroma Care wall basin installations for persons with disabilities complying to
A.S.1428-1.

The 500 Integra wall basin is hygienic and easy to clean, it has been designed for use in installations for persons with disabilities when used with suitably designed tapware. The basin features anti-splash rims and integral shrouded traps which protects the user from possible contact with the waste pipe.

Important: Further reference must be made to A.S.1428-1 with current amendments to confirm installation requirements. The dimensions in this sheet may change with amendments to the standard.

Position of Wall Basin: The basin must be installed to provide a specified unobstructed circulation and free access space beneath it so that water supply pipes and waste trap fittings do not encroach into the required clear space.

Position of Tapware: For compliance to the Standard the basin must be installed with lever or electronic type tapware.

The Caroma Care Opus or Nordic mixers with extended lever or the G Series hospital tap set with 150mm levers are ideal for this application and are recommended (see Caroma Taps).

It is a requirement that the end point of the lever throughout its operational arc of movement be not more 300mm from the front of the basin.

Specification: To specify use product code numbers. See specification Section 8 for further information.

Dimensions: All dimensions are in millimetres and are subject to normal manufacturing variations. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specification without notice.

This product is available in the following colours.
White

Colours are indicative only